has ANYONE tested ANYTHING on the LG VX6100? (ever?!)

[Dr.Dre'del]

and if you did, then HOW did you manage to get your app uploaded? I can't for the life of me find the cable/driver combo for this phone.

I have heard that the 6000 drivers work but that does not appear to be the case.

Any thoughts?

[gdw]

I was able to upload the application to VX6100 using the cable of vx6000. And I know that someone could use the cable of vx7000 for x6100 too.

[Dr.Dre'del]

thanks... I have been able to use the 7000 cable for the 6100 since I posted that plea for help.

[nparrish]

Just to set the record straight on this one:

The VX6000 serial cable will work if you jam it in the slot. The shape of the connector is only slightly different.

The new-shaped serial cables for all new LG handsets (VX3200/4700/6100/7000/8000) will work without any problems.

The VX7000 USB cable/drivers should work (at least they do for me).

[walterm]

Hi,

I installed USB driver for USB cable that comes along with LG 6100. After installing AppLoader, I can't connect to the handset. What could be the problem? Have anyone connected to 6100 using the USB cable for 6100?

Thank you.

[nparrish]

What COM port do you specify? On my machine, the correct port is usually COM7 or COM8, but it may vary.

[walterm]

It just automatically assigns the port: either COM3 or COM4, depending which USB port I connect it to. Do I have the right USB cable? Do I need special USB cable in order to access the phone using AppLoader?

[nparrish]

If the USB cable fits the device, it should work just fine. I've been using the cable and drivers from the VX7000 Mobile Office Kit, and I can connect to the VX6100 without any problems.

[Dr.Dre'del]

in my case, I had to plug it in, unplug it, plug it in again, about 4 times before suddenly it worked. If you're using win xp, listen for that chime when you plug in the phone that says that a new hardware device has been detected... then open app loader and see if any new com ports have appeared in the list.