Nokia 3205 AppLoader Problem

[rgaski]

Hello all,
I am hoping someone else has had the similar problem I am currently having. Any advice would be greatly appreciated.

I have BREW Tools Suite 3.0.0 installed, along with latest Nokia OEM dlls. When I try to connect to the Nokia 3205 with AppLoader, I get two options for OEM layer: QCOMOEM.dll and NokiaAppLoader.dll.

When I choose QCOMOEM.dll (which is the wrong OEM layer to use with a Nokia 3205), I get two choices for port: 4 and 10. (10 is where the USB cable is mapped according to device manager).

The problem is, when I choose NokiaAppLoader.dll as OEM Layer, I only have com port 4 available in drop down.

I'd like to choose com port 10 and NokiaAppLoader.dll.

Anyone have any thoughts?


Thanks is advance,
Rich

[andreja]

know that usually you would use serial cable to connect. In the app loaded it shows up under com 1. I am unaware that you can do it with a USB cable. Which USB cable are you using?

I have used TrueDial cable #22 with Nokia Suite to connect to Nokia 3589i, but had no luck with 3205 doing the same thing.

Have you had any BREW / app issues on this phone? Have you seen any fragmantation that you cannot explain?

[rgaski]

Thanks for the reply. No, I haven't noticed any of those problems because I haven't been able to connect the phone. The cable is the DKU-5, purchased directly from Nokia.

After from fooling with the com port settings I was able to get the ports working but I still get an error where I can connect to the specified device id.

Regards,
Rich

[boriskin]

try to
1) reinstall USB drivers from scratch
2) reinstall cable drivers from scratch
3) check if there are any apps affecting USB devices

I had the same problem with other phone, going through 1)-3) fixed the connection.